User Guide

Ref. IS.MDuino.42+ Rev. 1: 30-08-2019
18
Medical Devices
Directive
93/42/EEC
CE Marking
CE marking indicates that a
product complies with
applicable European Union
regulations
ISO 7000/
Graphical symbols
for use on
equipment
0434B /
Warning symbol
Indicates a potentially
hazardous situation which, if
not avoided, could result in
death or serious injury
ISO 7000/
Graphical symbols
for use on
equipment
5036 / Dangerous
Voltage
To indicate hazards arising
from dangerous voltages
Precautions 3
Read this manual before attempting to use the M-Duino PLC Arduino Ethernet 42 I/Os
Analog/Digital PLUS and follow its descriptions for reference during operation.
3.1 Arduino Board
The M-Duino 42 I/Os PLUS PLCs include Arduino Mega Board as controller.
3.2 Intended Audience
This manual is intended for technicians, which must have knowledge on electrical systems.
3.3 General Precautions
The user must operate M-Duino according to the performance specifications described in this
manual.
Before using M-Duino under different conditions from what has been specified in this manual
or integrating M-Duino to nuclear control systems, railroad systems, aviation systems, vehicles,
combustion systems, medical equipment, amusement machines, safety equipment and other
systems, machines, and equipment that may have a serious influence on lives and property if
used improperly, consult your INDUSTRIAL SHIELDS representative. Ensure that the rating and
performance characteristics of M-Duino are sufficient for the systems, machines, and
equipment, and be sure to provide the systems, machines, and equipment double safety
mechanisms. This manual provides information for programming and operating the M-Duino.