Manualshelf

Data Sheet

ManualsBrandsIndustrial Shields ManualsArduinoARDBOX PLC 20 I/O Arduino HF Industrial Module w/ Relays
11121314151617181920
Page
16
Cat. Nº: ABOX-104-001-71
- Select correct port.
Now everything is set up to upload a sketch to Ardbox Relay HF
6 How to connect PLC to power supply
- Ardbox Family PLCs are 12 to 24Vdc supplied. IMPORTANT: The polarity IS NOT
REVERSAL!
- Make sure that the live and GND connector of the power supply match the PLC.
- Make sure that the power supply mains output is not higher than 24Vdc.