Manual

DT 200 Users Manual version 1.E Built In Application Programs

# 6 ID, Tare, and Total

This program uses the ID memory to store tare weights and totals.

Enter ID Tare Data

Press the F1 key. The display prompts "id". Enter up to 8 digits for ID and then press

the ENTER key. The display prompts “tArE”. Enter the tare weight.

Recall ID and Tare

Press the F2 key. The display prompts "id". Enter up to 8 digits for the weigh-out ID

and then press the ENTER key. The indicator recalls the ID from memory and copies the

ID tare to the tare register.

Print and Total ID

Recall an ID and then press the Print key. The ID number, Gross, Tare, and Net are

printed. The Net weight is added to the ID’s totals register.

Print ID’s, Display ID’s, Clear Totals, Erase ID’s

Entering ID 0 accesses the ID maintenance functions. Press the F1 (or F2) key, press the

numeric 0 key, and then press the ENTER key. The display prompts "rePort". Press the

UNITS (↓) key or the PRINT (↑) key to scroll through the ID file maintenance menu.

REPORT: Press the ENTER key when the display prompts "rePort". The display then

prompts "id". Enter an ID number to be printed or enter the numeric 0 to print all ID's.

DISPLAY ID’s: Press the ENTER key when the display prompts “diSPLA”. The

display then prompts “id”. Enter an ID number to display the data in its registers, or

enter 0 to scan ID memory.

CLEAR TOTALS: Press the ENTER key when "CLEAr" is displayed. The display

prompts "id". Enter an ID number to clear or enter the numeric 0 to clear all ID totals.

ERASE ID'S: Press the ENTER key when the display prompts "ErASE". The display

then prompts "id". Enter an ID to be erased or enter the numeric 0 to erase all ID's.

REBUILD ID MEMORY: Press the ENTER key when the display prompts, “rebuiLd”.

The display then prompts “id”. Enter the numeric 0 then press ENTER to rebuild ID

memory.

COUNT UNUSED ID’S: Press the ENTER key when the display prompts “Count”.

The display prompts “FrExxx” where xxx is the number of unused ID records in

memory.

Set Beginning Sequence Number

Use the numeric keypad to enter number 1. The display prompts "reg 1" for 1 second and

then displays the current value. Press the CLEAR key if no change is to be made, or

enter a new value and then press the ENTER key. The next sequence number printed

will be the entered value +1.