Use and Care Manual

5 - ENG
LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY: Sanborn Mfg., Division of MAT Industries, LLC. (the Company)
warrants that for a period of twelve (12) months from the date of purchase, it will replace or repair,
free of charge, for the original retail purchaser only, any part or parts, manufactured by the Company,
found upon examination by the Company or its assigned representatives, to be defective in material
or workmanship or both. All transportation charges for parts submitted for replacement or repair under
this warranty must be borne by the original retail purchaser. This is the exclusive remedy under this
warranty.
Failure by the original retail purchaser to install, maintain and operate said equipment in accordance
with good industry practices, or failure to comply with the specific recommendations of the Company
set forth in the owner’s manual, shall render this warranty null and void. The Company shall not be
liable for any repairs, replacements, or adjustments to the equipment or any costs for labor performed
by the purchaser without the Company’s prior written approval. The effects of corrosion, erosion and
normal wear and tear are specifically excluded from this warranty.
THE COMPANY MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND
WHATSOEVER, EXPRESSED OR IMPLIED EXCEPT THAT OF TITLE. ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE ARE HEREBY DISCLAIMED. LIABILITY FOR CONSEQUENTIAL AND INCIDENTAL
DAMAGES UNDER ANY AND ALL WARRANTIES, OTHER CONTRACTS, NEGLIGENCE, OR
OTHER SORTS IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW.
Notwithstanding the above, any legal claim against the Company shall be barred if legal action thereon
is not commenced within twenty-four (24) months from the date of purchase or delivery whichever
occurs last. This warranty constitutes the entire agreement between the Company and the original
retail purchaser and no representative or agent is authorized to alter the terms of same without
expressed written consent of the Company.
TROUBLESHOOTING
Problem Possible Cause Solution
Valve will not close. Debris in self cleaning valve. Clean valve (See “Maintenance”).
Short in electrical component. Check the power cord for proper
connection.
Timer will not activate. No electrical supply. Apply power
Clogged port. Clean valve (See “Maintenance”).
Clogged strainer ball valve. Clean valve (See “Maintenance”).
Condensate not discharging. Filter in strainer ball valve could be
clogged.
Clean valve (See “Maintenance”).