PROD1185 Personal Digital Assistant User's Manual Version 1.0 2019.
This page is intentionally left blank.
Revision History Version 1.
Copyright Copyright © 2020 Industrea Mining Technology. All Rights Reserved. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve the reliability, design and function.
Contents Preface Declaration of Conformity CE Hereby, Industrea Mining Technology., declares that this Personal Digital Assistant/ PROD1185, is in compliance with the essential Requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. contact person Handheld Group AB Kinnegatan 17A 53133 LIDKÖPING Sweden Tel: +46 (0)510 54 71 70 Email: service@handheldgroup.
Preface Manufacturer Name: Industrea Mining Technology Manufacturer Address: 3 Co-Wyn Close, Fountaindale, New South Wales, 2258, Australia Operation Frequency: LTE-FDD/ B1:1920~1980MHz B2:1850~1910MHz B3:1710~1785MHz B4:1710~1755MHz B5:824~849MHz B7:2500~2570MHz B8:880~915MHz B12:698~716MHz B13:777~787MHz B18: 815~830MHz B19:830~845MHz B20:832~862MHz B25:1850~1915MHz B26:814~849MHz B28:703~748MHz LTE-TDD/ B38:2570~2620MHz B39:1880~1920MHz B40:2300~2400MHz B41:2496~2690MHz WCDMA/ B1:1920~1980MHz B2:185
Bluetooth: 2402-2480MHz RFID:13.56MHz Max. EIRP: 13.56MHz NFC‐48.95dBµA/m@3m Bluetooth 6.69dBm (EIRP) WLAN 2.4GHz band16.95dBm (EIRP) WLAN U‐NII‐1 band 21.33dBm (EIRP) GSM 900 band33±2dBm DCS 1800 band30±2dBm UMTS Bands24+1.7/‐2.7dBm LTE bands23±2.7dBm This product is intended for sale and application in a business environment.
FCC Warning: This device complies with Part 15 of FCC Regulations. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the guarantee of this device could void the user’s authority to operate the device.
Preface IC Warning: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Preface RoHS Industrea Mining Technology. certifies that all components in its products are in compliance and conform to the European Union’s Restriction of Use of Hazardous Substances in Electrical and Electronic Device (RoHS) Directive 2015/863/EU SVHC / REACH To minimize the environmental impact and take more responsibility for the earth on which we live, Industrea Mining Technology.
Preface Important Safety Instructions Read these safety instructions carefully: 1. Read all cautions and warnings on the device. 2. Dropping the device or letting it fall may cause damage. 3. Make sure the correct voltage is connected to the device. 4. For pluggable device, the socket outlet should be near the device and should be easily accessible. 5. Do not scratch or rub the screen with a hard object. 6.
Preface Do not use a power adapter that isn’t made for the device. Supplying the device with inappropriate voltage may cause harm to the battery or, even worse, burn the device. To prevent possible hearing damage, do not listen at high volume levels for long periods.
Preface General Cleaning Tips You may need the following precautions before you begin to clean the device. When you clean any single part or component for the device, please thoroughly read and understand the details below. 1. We strongly recommended that you power the device off before you start to clean. 2. When you need to clean the device, please rub it with a piece of dry cloth. 3. Never get the circuit board damp or wet. 4.
Recommended Cleaning Procedures 1. Close all application programs 2. Close operating software 3. Turn off the device 4. Remove all peripherals 5. Disconnect the power cable 6. Proceed to clean. Disposing of the Device • Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
Preface Warranty This product is warranted to be in good working order during the warranty period. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms. This warranty does not apply to products damaged by misuse, modifications, accident or disaster.
This page is intentionally left blank.
1 Chapter 1 Introduction -1-
Introduction 1.1 Specifications Main feature Basic information Connectivity WWAN(data only) Detail items Platform MTK6762 CPU 8*Cortex-4*A53 2.0GHz/4*A53 1.5GHz OS Android 9.0 ROM (eMMC) 32GB RAM 3GB SD card Capability up to 128GB EG25G (supported band will follow module’s certification definition) LTEFDD:B1/B2/B3/B4/B5/B7/B8/B12/B13/ B18/B19/B20/B25/B26/B28 LTE TDD: B38/B39/B40/B41 UMTS: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8 Wi-Fi PAN Bluetooth BT4.
Camera Sensors Front 5.0Mpxl (FF) Rear 13Mpxl(AF) Camera Flash LED GPS Yes Glonass Yes Galileo Yes Proximity sensor Yes Light sensor Yes E-Compass Yes G-sensor (Accelerate sensor) Yes Gyroscope Yes Barometer Yes I/O Cable Other Wires/ terminal 4pin - Vin, GND, Tx, Rx (only Tx, Rx with isolation) 4 wires with 20AWG at less(with Molex Crimp terminal PN “43030-0007”) ESD ±8kV air discharge,±4kV direct discharge Drop 1.
This page is intentionally left blank.
2 Chapter 2 Accessory Chapter 2 Getting Started -5-
Getting Started 1. Accessory : 1.1 Cable Specification - 4 wires with 20 AWG - 90 degree M8 IP67 connector - Length: 1.5m - With Molex Crimp Terminal(Molex PN: 43030-0007) Pin define Pin Signal 1 +Ve 2 -Ve 3 Tx 4 Rx 1.2 Cable(color) Red Black Blue Yellow Ram mount: RAM-B-347U The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base.
the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern This is mainly use to connect to the holder or stand. • • • • Material: Powder Coated Marine Grade Aluminum Ball Size:B Size 1" Rubber Ball Note:The "U" in the part number reflects product packaged in poly bag. Weight:0.1 lbs.
This page is intentionally left blank - 8- -
