User's Manual

CAS-GPS Node II User Manual
CAS-GPS Node II User Manual (DOCU0142) Rev A Page 6 of 20
3.4 Abbreviations
Abbreviation
Meaning
IVU
In Vehicle Unit
GPS
Global Positioning System
CAS
Collision Avoidance System
PAN
Personal Area Network
Wi-Fi
Wireless Communication Medium
GSM
Global System for Mobile Communications
OEM
Original Equipment Manufacture
TOF
Time Of Flight Distance Measurement Radio
V2V
Vehicle to Vehicle Radio Telemetry
RF
Radio Frequency
PDA
Personnel Digital Assistant also referred to as the Display
3
3.5 Definitions
Term
Definition
“system”
Refers to the assembled and installed operational elements which together perform
the desired functionality.
“system components”
Refers to the individual single elements which when assembled together at the
point of installation form the “system”. Each of these elements has a unique part
number.
4 Transport
All possible precautions are taken to protect the equipment against damage or losses during shipment, however before
accepting delivery, check all items against the packing list or Bill of Lading. If there are shortages or evidence of
physical damage, notify GE Digital Mining Technology immediately.
Notify GE Digital Mining Technology within 7 days (maximum) in case of shortages or discrepancies, according to the
packing list. This action will help ensure a speedy resolution to any perceived problems. Keep a record of all claims and
correspondence. Photographs are recommended.
Where practicable do not remove protective covers prior to installation unless there are indications of damage. Boxes
opened for inspection and inventory should be carefully repacked to ensure protection of the contents or else the
parts should be packaged and stored in a safe place. Examine all packing boxes, wrappings and covers for items
attached to them, especially if the wrappings are to be discarded.
The CAS-GPS NODE products contain lithium batteries with no more than 5Ah of capacity as well as several radio
transmitting components. It is mandatory that these products be fully discharged or placed into ‘transit mode’ before
shipping via air freight.