User's Manual

CAS-GPS Node II User Manual
CAS-GPS Node II User Manual (DOCU0142) Rev A Page 12 of 20
9.3.2 Vehicle in Motion
When your vehicle is moving, you can operate using your normal safe operating procedures. The Display will sound an
alarm to gain your attention if there is another vehicle that is getting too close. A quick glance at the display will show
the location, type, ID, heading and speed of other vehicles.
9.3.3 Positional Tracking
The system uses the latest precision point GPS technology which gives accurate location-based tracking.
9.4 Node Status Indicator Lamp
All Node variants will report their status via the multi-function lamp:
Node status indicator
Indication
Node Status
Off
Off
Red
Failed battery
Amber
Battery out of service temp range
Green
On, no battery
Green
On, not charging
Alternating Green/Cyan*
On, charging
Cyan
On, fully charged
*In this mode the lamp will cycle between the two colours at approximately 1Hz
You cannot silence the alarm whilst your vehicle is in motion.
For the GPS to work accurately the Node must have clear line of sight to the sky.
Obstructions such as machine structure, work roof or deep pit may affect the
accuracy or operation of the GPS.