User's Manual

Table Of Contents

DOCU0093

CAS ToF Units & CAS Dual RF/ToF Units User Manual

6 Wabtec Proprietary Information

3. LOGISTICS

This section describes the product unit transport, storage and Unpacking details.

3.1. TRANSPORT

All possible precautions are taken to protect the equipment against damage or losses during shipment,

however before accepting delivery, check all the items against the packing list or bill of lading. If there are

shortages or evidence of physical damage, notify Wabtec Digital Mining Technology immediately.

NOTE: Notify Wabtec Digital Mining Technology within 7 days (maximum) in case of shortages or

discrepancies, according to the packing list. This action will help ensure a speedy resolution to

any perceived problems. Keep a record of all claims and correspondence. Photographs are

recommended.

Do not remove protective covers prior to installation unless there are

indications of damage.

NOTE: Boxes opened for inspection and inventory should be carefully repacked to ensure

protection of the contents or else the parts should be packaged and stored in a safe place.

NOTE: Examine all packing boxes, wrappings and covers for items attached to them, especially if

the wrappings are to be discarded.

3.2. STORAGE OF EQUIPMENT

Where the equipment is not to be installed immediately, proper storage is important to ensure protection of

equipment and validity of warranty.

NOTE: All equipment should be stored indoors protected from the elements in a cool dry area.

If storing on the ground, ensure that the storage area is not an area where

water will collect.

3.3. UNPACKING OF EQUIPMENT

The method of packing used will depend on the size and quantity of equipment.

Take care when unpacking the equipment to avoid damage.

CAUTION