User's Manual
Table Of Contents
- 1. GENERAL INFORMATION
- 2. SAFETY INFORMATION
- 3. LOGISTICS
- 4. TECHNICAL SPECIFICATIONS
- 5. OVERVIEW
- 6. INSTALLATION, TEST AND COMMISSION
- 7. SERVICE AND MAINTENANCE
- 8. TROUBLESHOOTING
- 9. DECOMMISSION AND DISPOSAL
- 10. AUTHORIZED REPRESENTATIVES
- 11. WARRANTY TERMS
- 12. REGULATORY INFORMATION
- 13. INTERNATIONAL APPROVALS
- 14. LIFE SUPPORT POLICY
DOCU0093
CAS ToF Units & CAS Dual RF/ToF Units User Manual
Wabtec Proprietary Information 5
The CAS ToF system & CAS Dual RF/ToF Unit systems consists of various
components including an in vehicle unit and personnel tag all of which are
equipped with multiple radio transmitters. AS2187-2:2006 table I1,
recommends a safe operating distance from any designated blasting area
as greater than 20 meters. AS2187-2:2006 table I1 is an Australian
Standard and operators and users should have regard to all relevant and
applicable standards, which may apply within the country of use.
Operators and users should also have regard to all detonator and blasting
contractor and manufacturer recommendations and all applicable safety
and operational procedures applicable at the site, where the CAS ToF
System is used and which relate to safe operating distances. Details of
operating frequency and output power of the various CAS ToF System
components are set out in the CAS ToF specification and user
documentation. Operators and users should make their own assessment in
this regard.
WARNING