User Manual

PHQ-SERIES PANHEAD
OPERATING INSTRUCTIONS
Thank you for making Induro your choice for
professional photographic gear. Your Induro gear
is manufactured to provide years of dependable
service. In order to obtain optimum satisfaction
and performance we suggest that you carefully
read these instructions and provide them to
anyone who may also use your Induro gear.
USER NOTICE
c Do not exceed the maximum specified load
capacity (see specifications on the package
label or visit www.indurogear.com).
c Always ensure that all Panhead locks are
tightly engaged before mounting any gear.
c Do not use any Panhead below
temperatures of −4°F or above +158°F
(−20°C / +70°C).
c Always clean and dry any Panhead after
it has been exposed to wet, dusty, sandy
or salty conditions. Your Panhead is not
recommended for use in salt water. If
required, clean Panhead using a mild soap
solution applied with a soft cloth, rinse
with fresh water and dry with soft towel.
Remove any dust, dirt or sand from all
locks and all moving parts.
c Do not leave any Panhead in the sun
for prolonged periods and avoid high
temperature exposure.
c Avoid leaving any Tripod or Monopod
unattended in areas where people could
trip over the gear and get hurt.
c Remove camera, lens, and all gear from
any Tripod or Monopod when transporting.
c For your safety, don’t let your Induro
gear come in contact with any electrical
power source.
Specifications and design are subject to change without notice.
All tradenames, logos, and brand references are the respective trademarks of their owners.
INDURO Camera Support Gear | 75 Virginia Road, North White Plains, NY 10603 | T 914-347-3300 | F 914-347-3309 | [e-mail] | indurogear.com