Instruction Manual

10
COOKING ZONE
DIAMETER
MINIMUM PAN
DIAMETER
Ø 145 mm 80 mm
Ø 210 mm 130 mm
USE (Fig.8)
F
F
E
B
A
D
C
A- ON/OFF key > switch the appliance on
and o󰀨
B- Lock key > activate control panel lock /
child lock
C- Plus key > increase power level of the
cooking zone
D- Minus key > reduce power level of the
cooking zone
E- Display area > shows the values set for
the cooking zone
F- Cooking Zone > select and activate the
desired cooking zone
SWITCHING THE HOB ON
Press the on-o󰀨 key to switch the
appliance on. The displays will turn on in
the stand-by position.
The control unit remains active for 10
seconds.
If no cooking zone is selected within
this time, the cooking top switches o󰀨
automatically.
SWITCHING THE COOKING ZONE
ON
Press the relative key to select the
desired cooking zone and press the or
key within 10 seconds to set the power
level.
The power of the single cooking zone can
be adjusted in 9 di󰀨erent positions and will
be shown on luminous display B with a
number from “1 to 9”.
QUICK HEATING/POWER BOOST
This function further reduces cooking time
in a given area taking the temperature
to the maximum power for a 10 minute
interval. At the end of this interval, the
cooking area power automatically returns
to level 9.
The use of this function is recommended
for heating a large quantity of liquid in a
very short time (i.e. water for cooking
pasta) or other dishes.
To activate this function, select the cooking
area and press the key up to level 9.
Press the key again.
An acoustic signal will be emitted and a
symbol will be visualised on the display
E relative to the area.
RESIDUAL HEAT
If the temperature of the cooking area is still
high (over 50°) after it has been switched
o󰀨, the relative display will indicate the
symbol (residual heat). The symbol will
only switch o󰀨 when the burn risk in no
longer present.
POT DETECTION
If the symbol should appear on one of
the cooking area displays, it means that:
1) The recipient being used is not suitable
for induction cooking.
2) The diameter of the recipient used is
inferior to that allowed by the appliance.
3) No recipient is present.
TIMER
This function allows you to set the time
(from to minutes) to automatically
switch o󰀨 of the selected cooking zone.
Select a cooking zone by pressing one of
the F keys and set the power by pressing
the C or D keys.
To activate the timer press again the F key,
an acustic signal will be heard and the ‘‘t’’
symbol will appear on the display of the
selected cooking zone. Set the time by
pressing the C or D keys. If the cooking
zone is in the lower part of the cooktop
the time will be shown on the display of
the cooking zone in the upper part of the
cooktop and vice versa. Press the key F