User Manual

4. The default receiver channel map is TAER1234, please ensure your transmitter is matched with it,
otherwise it can't be armed.
5. The Default Arm/Disarm switch is AUX1(Channel 5),and you can also customize it with Cleanflight
Configurator or Betaflight Configurator.
6. Set Arm/Disarm switch for your TARANIS X9D:
Move to the MIXER interface, Set “SA” or “SB”
switch etc. for Ch5 to ARM/DISARM the motor.
7. Toggle the AUX1 Switch and the blue LED on the BEECORE will get be solid, this indicate the motor
was armed. Be careful and enjoy your flight now!