User Manual

2. Ports and receiver mode sets like the bellowing diagram
3. Binding Procedure: Power for the BEECORE, waiting the LED Combo (2 Red and 2 White) blinking
fast, this means the BEECORE is in binding mode ,then turn on your Radio and enter into binding
mode, the LED Combo (2 Red and 2 White) will turning off and then get to be solid if binding
successfully. Please repeat the above operation if binding not success.
4. The default receiver channel map is TAER1234, please ensure your transmitter is matched with it,
otherwise it can't be armed.
5. The Default Arm/Disarm switch is AUX1(Channel 5),and you can also customize it with Cleanflight
Configurator or Betaflight Configurator.
6. Toggle the AUX1 Switch and the blue LED on the BEECORE will get be solid, this indicate the motor
was armed. Be careful and enjoy your flight now!