User's Manual

ManualsBrandsIndian Creek ManualsPaintballIndian Creek B2K V2.1

INSTRUCTION MANUAL

Version 2.1

Indian Creek Design BushMaster series

Model B2K

No part of this document may be copied or reproduced in any form or by

any means without the prior written consent of Indian Creek Design, Inc.

Trademark Notices:

* Panther VTS is a registered trademark of Indian Creek Design, Inc.

* Panther II VTS is a trademark of Indian Creek Design, Inc.

* Puma is a trademark of Indian Creek Design, Inc.

* Bobcat is a trademark of Indian Creek Design, Inc.

* Thunder CAT is a trademark of Indian Creek Design, Inc.

* Desert FOX is a trademark of Indian Creek Design, Inc.

* 45/68 Magnum VTS is a trademark of Indian Creek Design, Inc.

* BushMaster 2000 is a trademark of Indian Creek Design, Inc.

* B2K is a trademark of Indian Creek Design, Inc.

* B2K2 is a trademark of Indian Creek Design, Inc.

* BKO is a trademark of Indian Creek Design, Inc.

Notice is hereby given that this manual is part of the article owned in

whole by Indian Creek Design, Inc., known as indicated in this manual

and drawings. All rights of manufacture and reproduction of such

articles or any part thereof are reserved by Indian Creek Design, Inc.

Neither said article nor any part thereof may be manufactured or

reproduced except by written authorization from Indian Creek Design,

Inc. All proprietary rights and information are the sole property of

Indian Creek Design, Inc.

STATEMENT OF LIABILITY

Indian Creek Design, Inc., delivers this air gun with the

understanding that Indian Creek Design, Inc., assumes no

responsibility for its resale or safe handling. It can be considered a

dangerous weapon if mishandled, abused, or the safety instructions

are ignored. Indian Creek Design, Inc., assumes no responsibility

for physical injury or property damage resulting from its use.

Indian Creek Design, Inc., makes no warranties with respect to this

documentation and disclaims any implied warranties of

merchantability or fitness for a particular purpose. The information

in this document is subject to change without notice. Indian Creek

Design, Inc., assumes no responsibility for any errors that may

appear in this document.

WARNING:

This is not a toy. Misuse may cause serious injury or

death. Eye protection designed for paintball use must

be worn by the user and any person within range. It is

to be used by adults only. It is to be used on safety

certified fields only. Obey all local, state and federal

laws. Follow the rules of safe paintball gun handling.

Read all instructions before use.

Summary of content (7 pages)

PAGE 1
INSTRUCTION MANUAL Version 2.1 Indian Creek Design BushMaster series Model B2K Copyright 1993…. 2003 All Rights Reserved No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Indian Creek Design, Inc. Trademark Notices: * Panther VTS is a registered trademark of Indian Creek Design, Inc. * Panther II VTS is a trademark of Indian Creek Design, Inc. * Puma is a trademark of Indian Creek Design, Inc.
PAGE 2
B2K OVERVIEW OPERATION The B2K is a quality marking instrument specially designed to meet the needs of the professional style tournament player. The B2K is an electronic solenoid actuated computer controlled marking device. The major components of the B2K are machined from solid, aircraft-grade aluminum, and then hard anodized per military specifications. No castings are used in the construction of the B2K, thereby providing the end user with a high-quality, precision-engineered marking instrument.
PAGE 3
separate the upper section from the lower section, being careful not to put stress on the wiring harness (blue wires) connected to the solenoid valve on the upper section. Place the tray and upper body together being careful not to pinch any wires in the body, bring the blue wire loop back to its original position. Turn the main on-off switch to the on position and be sure the LED lights up, then turn off. Replace the four 6-32X1" screws and the grip panel.
PAGE 4
3. 4. 5. 6. Remove the pressurized gas from the marker carefully. Tilt the marker so that the loader is lower than the body of the gun. Remove the paintball loader from the direct vertical-feed tube, turning the loader in a clockwise direction. Inspect the inside of the direct vertical-feed tube to be sure that a ball does not remain inside the breech.
PAGE 5
STORAGE AND TRANSPORTATION - Your B2K must be clear of all paint and propellant when not being used. - Be sure the on-off switch is off and the LED is not lighted. - Put the barrel plug in place. - Make sure the gun is clean. - Store your B2K in a clean, cool, dry place. - Keep your B2K away from children. This air gun is not a toy! To be used by adults only! Your B2K must be clear of all paint and any source of propellant during transportation to and from the playing field. Keep your barrel plug in place.
PAGE 6
but does not permanently rest on it. Continually check to verify that the LED flashes off and then back on when you pull the trigger. If you pull the trigger and the LED goes off and stays off, you have adjusted the screw in too far. Back it out. 4. Adjust the spring tension by turning the screw in for more tension and out for less tension. 5. Clean up any excess loctite and let it dry for at least an hour before using your B2K. This ensures the screws will remain in place.
PAGE 7
a. Tighten the 4-way valve to the manifold. Take care not to over-tighten. b. Check for over-pressurization from the low pressure regulator. Re-adjust the low pressure regulator. c. Replace the O rings on the cylinder assembly. Sized -015. d. Replace the piston O ring. Sized -011 e. Replace the solenoid/valve assembly. Ball Breakage Problems 1. The ball breaks in the breech. a. The balls in your loader can bind, messing up your trigger timing. Note the ball drop and use an agitated loader. b.