Manualshelf

User's Manual

ManualsBrandsIndian Creek ManualsPaintballIndian Creek B2k LCD
12345678910
7
where you purchased your B2K2, or a recognized and competent airsmith, for
instruction in the safe handling of compressed-air cylinders before purchasing or
connecting one to your B2K2.
Adjustable regulator compressed air systems:
The input pressure from your compressed air system should be regulated down to
350-500 PSI output pressure. Note: on MOST systems, there is a large difference
between the setting pressure and the actual output operating pressure. If your
compressed air system does not have an output pressure gauge on its regulator we
do not recommend its use.
Fixed output regulated compressed air systems:
VERIFY the output pressure from the regulator. If your compressed air system
does not have an output pressure gauge on its regulator we do not recommend its
use.
CO2 usage:
Although it may be used, CO2 is not recommended for use as the propellant.
Generally the CO2 that we use as an industry is industrial grade CO2. It is dirty,
pumped from large tanks full of contaminates including rust and metal flakes. CO2
can be used successfully if used with anti-siphon systems and filters. Be aware that
under the conditions of CO2 the results may not be as expected.
REMEMBER: CO2, compressed air or nitrogen systems can be extremely
dangerous if misused or improperly handled. Use only D.O.T. certified tanks.
Before pressurizing your B2K2, check to make sure that you have a barrel plug in
place and there is no paint in the gun. The on-off switch should be OFF. Air can
now be applied, the gun will become pressurized and the bolt will move backwards.
Paintball and Loader Usage
The B2K2 comes equipped to accept 1.03" OD standard-gravity feed loaders. Fit
the loader directly into the vertical feed tube. Always twist it down in a
CLOCKWISE direction. Always twist it off in a CLOCKWISE direction as well.
The B2K2 uses .68 caliber, water-soluble paint pellets. The pellets are gravity fed
from the loader through the direct vertical feed nipple and into the breech of the
gun.
DIP Switch settings - Modes - Rate of Fire -