User's Manual

Software and an on-board connector for the infrared sensors (anti-chop eye) are

already built into the board so that upgrades will be easier in the future. The

LCD, when turned on, first shows the mode, then the rate of fire, and then

defaults to the game timer and shot counter that run during the game. The LCD

is simple to use. It=s practical. It=s made for Paintball. It=s not Playstation,

Nintendo, Windows or Mac compatible. To bypass the mode and BPS display,

you can pull the trigger and then turn the main switch to the on position, that

activates the timer immediately and allows the gun to fire on the very next

trigger pull.

CO2, Nitrogen or Compressed Air Usage

The B2K2 comes with a male quick-disconnect adapter on the input side of the

regulator. The B2K2 can be set up to use a nitrogen or compressed air system.

Although it may be used, CO2 is not recommended for use as the propellant.

Generally the CO2 that we use as an industry is industrial grade CO2. It is dirty,

pumped from large tanks full of contaminates including rust and metal flakes. CO2

can be used successfully if used with anti-siphon systems and filters. Be aware that

under the conditions of CO2 the results may not be as expected. Consult the place