User's Manual

10
Rate of Fire and timing is as follows:
Dip switch #4 and #5 (registers Solenoid on times in milliseconds)
#4 #5
off off = 06 ms (.006 seconds)
on off = 08 ms (.008 seconds)
off on = 10 ms (.010 seconds)
on on = 12 ms (.012 seconds)
Dip switch #6, #7 and #8 (registers Solenoid off (delay before re-cycle) times in
milliseconds)
#6 #7 #8
off off off = 70 ms (.070 seconds)
on off off = 80 ms (.080 seconds)
off on off = 90 ms (.090 seconds)
on on off = 100 ms (.100 seconds)
off off on = 110 ms (.110 seconds)
on off on = 120 ms (.120 seconds)
off on on = 130 ms (.130 seconds)
on on on = 140 ms (.140 seconds)
Calculating the cycles per second is easy and precise. For instance, if, S4 is off &
S5 is on, S6 & S7 are off and S8 is on the rate is calculated as .010 + .110 = .120.
The total cycle times for .120 = 8.33 cycles per second (1 divided by .120).
This is the calculation for Balls Per Second.
Firing the B2K2
Keep your finger out of the trigger guard and away from the trigger; point the
muzzle of your gun in a safe direction at all times during this process. Be sure your
goggles are securely in place. Push the on-off switch into the off position.
Always keep your B2K2 pointed in a safe direction!
1. Place the empty loader onto the gun. Be sure that it is securely mounted in
place.
2. Apply the compressed gas, pressurizing the gun.