User manual

6Menu Structure
© 2012 Index Braille
OK
Select menu item
Save selected value
Number keys
1
Gives the figure 1, a fraction of an inch
10
Gives the figure 10, one inch
Moves paper arms, in status idle - Braille Box
CHS
Change sign between increase or decrease in
numerical function
HELP
Echo printer status, number of copies
completed and position of the current printout
Double keys
OFF+FEED
Stop embossing
FEED+FEED
Basic-D = Place paper in emboss position
FEED+OFF
Basic-D = Reverse the paper out of the
embosser
HELP+MENU
Echo: lines per page and characters per line
HELP+CHS
Toggle between local and English speech
feedback
HELP+10
Echo embosser IP address
HELP+ON
Emboss hammer test page
HELP+HELP
Information page in letter graphics
10+1
Start command center
1+10
Start service center (Pin code protected
contact [e-mail])
2.2 Layout 1-5
The Layout 1-5 is used to set alternative paper sizes and Braille layout parameters, top margin,
binding margin, lines per page and characters per line etc.
Press arrow up/down key to start Set Layout, echo "set layout, current value is 1-5"
Press arrow up/down to preferred layout, echo "1-5"
Press OK to select layout 1,2,3,4 or 5.
Pressing HELP in the layout function will present a list of the most important setting in the layout
file.
These are: top margin, lines per page, binding margin, characters per line, duplexing single or
double news paper format etc.