User manual

1 Index V4 Embosser manual
© 2012 Index Braille
1 Getting started
1.1 Unpacking the embosser
Unpack the embosser gently, save the packing material and transport lock in case of future
transportation of the embosser.
1.1.1 Removing transport lock
The green transport lock is aimed to protect the embossing mechanics during transport.
1.1.1.1 Basic-D
Remove the green transport steel rod from the back side of the Basic-D. Store it in place of the
individual holders located on the back pallet.
(Work task Video - Removing the transport lock Basic-D)
1.1.1.2 Everest-D, Braille & Print
Remove the two green plastic transport locks from the sheet feeder of the Everest-D/Braille &
Print. Carefully store the locks in case of future transportation of the embosser.
(Work task Video - Removing the transport lock Everest-D, Braille & Print)
1.1.1.3 Braille Box
1.
Open the paper tray and remove the transport protection foam.
2.
Open the service lid and remove the 3 green transport locks from each embossing head axle.
3.
Store the 3 transport locks on the holders of the embosser tower . (Left side of tower,
located
on the ends of each head axle.)
(Work task Video - Removing the transport lock Braille Box)
1.1.2 Included in Shipment
The following is included in shipment:
Embosser
External switched power supply in Basic-D and Everest-D
Power cable
USB cable
User manual