User's Manual

14
Connection to External equip-
ment
DTV Setup
- To watch digitally broadcast programs, purchase and connect a dig-
ital set-top box.
Connections
Connect the digital set-top box video outputs to the COMPONENT
(Y, P
B
, PR) jacks and connect the digital set-top box audio outputs to
the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner’s manual for the
digital set-top box.)
2. Use the INPUT SELECT button on the remote control to select
COMPONENT.
PC (DTV) Setup
Connect the signal cable from the monitor output socket of the PER-
SONAL COMPUTER to the RGB INPUT socket of the set.
Connect the audio cable from the PC to the AUDIO INPUT sockets of
the set.
Press the INPUT SELECT button to select PC-RGB.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
RGB-DTV input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz, 720p-
60Hz, 1080i-50Hz, 1080i-60Hz.
Detection of “AUTO-RGB” can be operated properly only with RGB
cable included.
AUDIO INPUTAUDIO INPUT
R L
COMPONENT COMPONENT INPUT INPUT
(480i/480p/720p/1080i)(480i/480p/720p/1080i)
Y P b P r
Magi-LinkMagi-Link
AV1V1
ANTANT. IN. IN
DTV Receiver (Set-top Box)
RGB OUTPUTRGB OUTPUT
(R) (R) AUDIO (L)AUDIO (L)
AUDIO INPUTAUDIO INPUT
RGB INPUTRGB INPUT
Magi-LinkMagi-Link
External Speaker Output
Send the set’s audio to external audio equipment (stereo system) via
the external speaker output.
How to Connect
- Connect one end of a speaker cable to the TV external speaker out-
put port.
- Connect the other end of the external speaker cable to external
speaker input on the audio equipment.
S-VIDEO
AC INPUTAC INPUT
AV2
8
or