User Manual

© Inno
Care Optoelectronics
Appendix B Electromagnetic
Compatibility (EMC)
B.1 Yushan FPD
This equipment has been tested and found to comply with the limits for medical
devices to the IEC 60601
These limits are designed to provide re
interference in a typical medical installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to
other devices in the vicinity.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to other devices, which can
be determined by tuning the equipment off and on, the
try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving device.
-
Increase the separation between the equipment.
-
Connect the equipment into an outlet on a circuit different from that
which the other device(s) are connected.
If the problem cannot be solved with the above measures, stop using this
equipment and consult the manufacturer
Representative for help.
_________________________________________
Warning
Do not place devices generating electromagnetic wave near this equipment.
If a device(s) other than those specified is connected, predetermined EMC
performance can not be guaranteed.
__________________________________________
Care Optoelectronics
Corporaon │ X-
Ray Products
Appendix B Electromagnetic
Compatibility (EMC)
B.1 Yushan FPD
This equipment has been tested and found to comply with the limits for medical
devices to the IEC 60601
-1-2:2014/EN 60601-1-2:2015.
These limits are designed to provide re
asonable protection against harmful
interference in a typical medical installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
other devices in the vicinity.
However, there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to other devices, which can
be determined by tuning the equipment off and on, the
user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment into an outlet on a circuit different from that
which the other device(s) are connected.
If the problem cannot be solved with the above measures, stop using this
equipment and consult the manufacturer
, our official dealer or I
Representative for help.
_________________________________________
____________________
Do not place devices generating electromagnetic wave near this equipment.
If a device(s) other than those specified is connected, predetermined EMC
performance can not be guaranteed.
__________________________________________
___________________
70
Ray Products
Appendix B Electromagnetic
This equipment has been tested and found to comply with the limits for medical
asonable protection against harmful
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
However, there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to other devices, which can
user is encouraged to
try to correct the interference by one or more of the following measures:
Connect the equipment into an outlet on a circuit different from that
to
If the problem cannot be solved with the above measures, stop using this
, our official dealer or I
nnoCare
____________________
Do not place devices generating electromagnetic wave near this equipment.
If a device(s) other than those specified is connected, predetermined EMC
___________________