User Manual

© Inno
Care Optoelectronics
Chapter 1
This manual is intended to provide the operator with an overview of the
operation and safety requirements for the
This manual i
s not intended to provide instructions on actual treatment
procedures and it is expected that users should have official
other practitioners
license prior to using the
Distribution organization assume no liab
All care has been taken in the preparation and checking of this manual
however there is no guarantee provided that all information is correct. The
information provided in this manual is subject to change without notice.
Only CE or FDA approved or authorized
device
. The Manufacturer and Distribution organization shall not be held liable
or responsible for damages or injury caused as a result of
accessories.
Installation m
personal.
Some maintenance and service work
authorized service agents and only those procedures outlined in the operator
and service manual are allowed. Any service work carried out by
person will void all warranties. No circuit diagrams or component part lists are
to
be provided for this device
provided in this manual then please contact the manufacturer or your local
dist
ributor in writing with your reasons for wanting them and then a copy of the
service manual may be provided. Before using the
Detector,
the operator should read this manual carefully and pay particular
attention to the sections of S
________________________________________
Caution
InnoCare Optoelectronics Corp.
damages resulting from use under environment conditions outside the range of
u
sing conditions for this product such as power supply, installation
environment, etc. contained in this manual.
InnoCare Optoelectronics Corp.
damages resulting from natural disasters such as fires, earthquakes, flo
lightning, etc.
_____________________________________________________________
Care Optoelectronics
Corporaon │ X-
Ray Products
Chapter 1
Introduction
This manual is intended to provide the operator with an overview of the
operation and safety requirements for the
Yushan X-
Ray Flat Panel Detector.
s not intended to provide instructions on actual treatment
procedures and it is expected that users should have official
radiologist or any
license prior to using the
device
. The Manufacturer and
Distribution organization assume no liab
ility thro
ugh the use of the device
All care has been taken in the preparation and checking of this manual
however there is no guarantee provided that all information is correct. The
information provided in this manual is subject to change without notice.
Only CE or FDA approved or authorized
accessories may be used in this
. The Manufacturer and Distribution organization shall not be held liable
or responsible for damages or injury caused as a result of
using non
Installation m
ay only be conducted by authorized service
Some maintenance and service work
also
must be carried out by
authorized service agents and only those procedures outlined in the operator
and service manual are allowed. Any service work carried out by
person will void all warranties. No circuit diagrams or component part lists are
be provided for this device
. If you require technical documentation that is not
provided in this manual then please contact the manufacturer or your local
ributor in writing with your reasons for wanting them and then a copy of the
service manual may be provided. Before using the
Yushan X-
Ray Flat Panel
the operator should read this manual carefully and pay particular
attention to the sections of S
afety, Operation and Maintenance.
________________________________________
____________________
InnoCare Optoelectronics Corp.
shall not be liable for malfunctions and
damages resulting from use under environment conditions outside the range of
sing conditions for this product such as power supply, installation
environment, etc. contained in this manual.
InnoCare Optoelectronics Corp.
shall not be liable for malfunctions and
damages resulting from natural disasters such as fires, earthquakes, flo
_____________________________________________________________
6
Ray Products
This manual is intended to provide the operator with an overview of the
Ray Flat Panel Detector.
s not intended to provide instructions on actual treatment
radiologist or any
. The Manufacturer and
ugh the use of the device
.
All care has been taken in the preparation and checking of this manual
however there is no guarantee provided that all information is correct. The
information provided in this manual is subject to change without notice.
accessories may be used in this
. The Manufacturer and Distribution organization shall not be held liable
using non
-approved
ay only be conducted by authorized service
must be carried out by
authorized service agents and only those procedures outlined in the operator
and service manual are allowed. Any service work carried out by
unauthorized
person will void all warranties. No circuit diagrams or component part lists are
. If you require technical documentation that is not
provided in this manual then please contact the manufacturer or your local
ributor in writing with your reasons for wanting them and then a copy of the
Ray Flat Panel
the operator should read this manual carefully and pay particular
____________________
_
shall not be liable for malfunctions and
damages resulting from use under environment conditions outside the range of
sing conditions for this product such as power supply, installation
shall not be liable for malfunctions and
damages resulting from natural disasters such as fires, earthquakes, flo
ods,
_____________________________________________________________