User Manual

- This group only serves as emulation of two-stage exposure button, and

verifies the API functionality.

- After selecting the Software sync mode, press Start.

- When performing an exposure, make sure that the STATUS LED light in

green and not flashing.

4.3.5.3 AED repeat mode

- After selecting the AED repeat mode, press Start.

- When FPD is in AED repeat mode, it stays in AED repeat mode after

each X-Ray exposure is detected. User can use Stop to exit AED repeat

mode.

- The utility doesn’t not download the exposure image after each exposure,

it only updates the information of the newly created exposure image in the

Image List area.