User Manual

© Inno
Care Optoelectronics
Chapter
4 Basic O
4
.1 Preparing the Flat Panel Detector
This section describes how to prepare the f
4
.1.1 Type of Flat Panel Detector
Yushan V14C, Yushan
V14G
4
.1.2 Number of the Connectable Flat Panel
Up to 5 panels can connect to system at the same time.
4
.1.3 Connecting/Disconnecting the Flat Pane
Detector
Do not place the connector on floor.
Make sure that the latches on both sides are
properly engaged when connecting the
connector.
If the connector is inserted
incompletely, the power
Care Optoelectronics
Corporaon │ X-
Ray Products
4 Basic O
peration
.1 Preparing the Flat Panel Detector
This section describes how to prepare the f
lat panel detector.
.1.1 Type of Flat Panel Detector
V14G
, Yushan V17C, Yushan V17G
.1.2 Number of the Connectable Flat Panel
Detector
Up to 5 panels can connect to system at the same time.
.1.3 Connecting/Disconnecting the Flat Pane
Do not place the connector on floor.
Make sure that the latches on both sides are
properly engaged when connecting the
If the connector is inserted
incompletely, the power
may turn off.
35
Ray Products
.1 Preparing the Flat Panel Detector
Detector
.1.3 Connecting/Disconnecting the Flat Pane
l