User Manual
31
© InnoCare Optoelectronics Corporaon │ X-Ray Products
3.2.2 Accessories
Back
-
up cable
Description: A cable which one side connects the flat panel detector and the
other side spilt into two cable, one is RJ45 connector to connect with ethernet
port, and the other side is DC Jack 5.5x2.5 to connect with the output of
AC/DC adapter. Cable length: 2.5m
Adapter
Description: Medical grade AC/DC adapter which is used to provide power
either to detector or use to charge the battery installed on FPD.
- Input : 100-250V ~ 1.5-0.75A 50-60Hz
- Output : 24V ⎓ 2.5A
- Length : 1.5M
- The adapter must in accordance with IEC 60601-1: 2005 + CORR.
1:2006 + CORR. 2:2007 + AM1:2012.