User Manual

© Inno
Care Optoelectronics
Chapter 3
3.1 How t
o C
Yushan
FPD can be operated either in wireless connection mode or wired
connection mode. When using wired mode, back
provide the link from FPD to network switch hub or to PC.
connect back-
up cable to
to operate or charging its battery. If the ad
powered by its own battery.
_____________________________________________________________
Caution
Do not touch the back-
up cable connector
otherwise
it may result in electric shock or
_____________________________________________________________
Care Optoelectronics
Corporaon │ X-
Ray Products
System C
onfiguration
o C
onnect FPD
FPD can be operated either in wireless connection mode or wired
connection mode. When using wired mode, back
-
up cable is necessary to
provide the link from FPD to network switch hub or to PC.
User can also
up cable to
the adapter provided by InnoCare
to give the power
to operate or charging its battery. If the ad
apter is
not connected, FPD will be
powered by its own battery.
_____________________________________________________________
up cable connector
of Yushan
when in wireless mode
it may result in electric shock or
malfunction of the equipment
_____________________________________________________________
29
Ray Products
onfiguration
FPD can be operated either in wireless connection mode or wired
up cable is necessary to
User can also
to give the power
not connected, FPD will be
_____________________________________________________________
when in wireless mode
,
malfunction of the equipment
.
_____________________________________________________________