User Manual

© Inno
Care Optoelectronics
To charge the battery pack, be sure to use the designated
to observe
the charging conditions specified by
Corp.. If
the battery pack is charged in
voltage/current higher th
battery pack may be overcharged or charg
abnormal ch
emical reactions may occur inside the batter
overheat,
emit smoke, explode or ignite.
Immediately stop charging the battery pack, if charging is not completed within
the specified
time. Otherwise, the battery pack may overheat, emit sm
explode or ignite.
Do not use the flat panel
Do not use a faulty or broken battery charger or AC adapter.
_____________________________________________________________
2.13
Battery Pack Instructions
_____________________
Warning
Battery pack requires regular checkup and replacement. Battery capacity
begins to warm
after a period of time.
If this equipment is not in use for while, store it with the battery pack removed.
Not removin
g the battery pack may cause malfunction.
Caution
The battery pack is
used with the flat panel detector
combinations.
Charge the battery pack only with the designated battery charger. If the battery
pack is
charged under the cha
method) different
from those specified by
battery pack may emit smoke, ignite,
Store the battery pack in a cool and dark place. Recharge the stored b
pack every
six months or every year. Otherwise a decrease in battery capacity
or other problems may
result.
Care Optoelectronics
Corporaon │ X-
Ray Products
To charge the battery pack, be sure to use the designated
battery charger and
the charging conditions specified by
InnoCar
e Optoelectronics
the battery pack is charged in
other conditions (temperature or
voltage/current higher th
an specified, remodeled battery
charger, etc.), the
battery pack may be overcharged or charg
ed with extremely high current,
emical reactions may occur inside the batter
y pack, causing it to
emit smoke, explode or ignite.
Immediately stop charging the battery pack, if charging is not completed within
time. Otherwise, the battery pack may overheat, emit sm
Do not use the flat panel
detector near the power cable.
Do not use a faulty or broken battery charger or AC adapter.
_____________________________________________________________
Battery Pack Instructions
_____________________
________________________________________
Battery pack requires regular checkup and replacement. Battery capacity
after a period of time.
If this equipment is not in use for while, store it with the battery pack removed.
g the battery pack may cause malfunction.
used with the flat panel detector
. Do not use them in other
Charge the battery pack only with the designated battery charger. If the battery
charged under the cha
rging conditions (voltage, current and charging
from those specified by
InnoCare Optoelectronics Corp.
battery pack may emit smoke, ignite,
explode or leak fluid.
Store the battery pack in a cool and dark place. Recharge the stored b
six months or every year. Otherwise a decrease in battery capacity
result.
19
Ray Products
battery charger and
e Optoelectronics
other conditions (temperature or
charger, etc.), the
ed with extremely high current,
and
y pack, causing it to
Immediately stop charging the battery pack, if charging is not completed within
time. Otherwise, the battery pack may overheat, emit sm
oke,
_____________________________________________________________
________________________________________
Battery pack requires regular checkup and replacement. Battery capacity
If this equipment is not in use for while, store it with the battery pack removed.
. Do not use them in other
Charge the battery pack only with the designated battery charger. If the battery
rging conditions (voltage, current and charging
InnoCare Optoelectronics Corp.
, the
Store the battery pack in a cool and dark place. Recharge the stored b
attery
six months or every year. Otherwise a decrease in battery capacity