User's Manual

1. When turn on the power without external power, red LED light
will blink, it means battery is lower and need to charge. During
charging, the red LED light will not be off till finished charge.
2. When turn on the power, blue LED light will be lit for 3 seconds
then go off; Press “CONNECT” button, the blue LED light will be
lit steady, this means access into pairing state, the blue LED
light will be off at once when finish the pairing. If it did’t finish
the pairing and any operation within 60 seconds, the keyboard
will access into standby mode till next pairing starts.
3. After finish the pairing, we can run the function operation on
keyboard. If it’s unnecessary, please keep the pairing message
of external device.
4. If there is not any keyboard operation within 10 minutes or the
external device is far away bluetooth’s operating distance for
10 minutes, the keyboard will access into standby mode. You
can touch any key to wake the keyboard to work within 2-3
seconds (the external device must be at the valid connecting distance).
Brief Description