Owner Manual

Align the Mechanism (4) over

the pre-drilled holes underneath

the Seat Cushion (2). Then fix it

with the Bolts (9).

Insert Seat Cushion (2) into the

Gas Lift (5), fix the right and

left Armrest (3) with the Bolts

(10).

To make sure to assemble the

backrest easily, do not make

the bolts fully tight first, tight

these bolts after fix the

backrests fully please.

Note :

Don't make the direction wrong,

make sure the front of the

mechanism is facing the front of

the Seat.

Note 1: The "Front" mark on the Armrests and the "Front" mark on the

Seat Cushion should be in the same direction.

Note 2: Armrests are labeled with an "L" (left) or "R" (right) to show

which sides they should be placed on.

Step 4:

Step 3:

(9)×4

(4)

(2)

(10)×2