METAL CABINET ASSEMBLY INSTRUCTION NOTE : PLEASE AN ASSISTANT IS REQUIRED ES NECESARIO UN AYUDANTE UN ASSISTANT EST NECESSAIRE.
A: Back panel left part B: Back panel right part C: Left side panel D: Right side panel E : Front top frame F : Front bottom frame G: Top panel H : Bottom panel K: Shelf 2PCS I:Left Door J: Right Door 5mm×24.5mm 0.8mm×9.
Installation Steps: D B C A With 6pcs Screws 1 Connect the A and B ,then fix the C and D with 6pcs screws. Install the E and F as arrows diretion from inside to front. Fasten F tightly as this E After fastened F With 8pcs Screws ATTENTION: FOR YOUR C0NVENIENCE, PLS FIX THE SCREW AFTER FINISHING THE 3ND STEP INSTALLATION. 2 Install E and F.
Assembly the top panel and insert the clip ,also with 1 pc screw to fix in the middle top panel. G With 2pcs Screws H Put H in the bottom to make it connection ,with 1 screw to fix in the middle of the back panel 3 G AND H installation K Shelf Support fixed block 4 Put the shelf support insert the hole,each level needs 4 pcs to keep flat ,also fixed block need 4pcs ,so the shelf K wont move and shake .
J K 5 Install the lock I J 6 Install the doors，then finish .
