Owner Manual

Instruction
10
S
1 2 3
▲
▲
·
Saving position
Adjust the desktop to the height you want to save.
·
Press“S”key，till the display will show“S--”.
·
Press“1”，and the display will show alternately as“S-1”and the
desktop height.
·
Press“S”key，the first memory position is set successfully. Similar
progress for 2 and 3 memory positions.
·
·
Up and Down
Keep pressing“up”key till the required height is reached.
·
Keep pressing“down”key till the required height is reached.
·
·
Manual Reset
·
It is necessary to be reset manually after the
initial installation and power off.
Keep pressing down key till the desktop till display shows“E-1”and“rES”
alternately and release the key.
Keep pressing down key, the desktop will move slowly down and retum
back till the display shows“27.6”.
·
Release the key, the height-adjustable desk resetting finished.
Note: The anti-Collision function is not enabled during all resets. Please note that there is a
potential risk of pinching in this case, and be sure no obstacles in the desk's path.
1.
2.
3.
1.
2.
1.
3.
4.
2.
▲
▲
▲
▲
▲
S
1
S
·
27.6
rES