Owner Manual

❻ Make sure you
understand which hardware
will be used on each step.
Using the wrong size of
screw, bolt or pin might
strip the threads or cause
damage to the part in which
it is being used.
carefully pierce the laminate to reveal the hole’s
actual size.
ASSEMBLY STEPS
STEP 1
First install the non-locking casters E at the back of the legs 3, and the
locking casters F at the front using the cone wrench (spanner) as shown.
Then attach the plastic covers G1 and screw knobs G2 to the top of the
legs 3, making sure the knob faces towards the back as shown.
Hardware:
E
Non
locking
2
Pcs
F
Locking
2
Pcs
G1
Covers
4
Pcs
G2
Screw
knob
4
Pcs
I
STEP 2
Assemble the central structure 6 in between the legs 3 using screws A
as shown.
Hardware:
A
4
Pcs
H
NON-LOCKING
AT THE BACK
LOCKING AT
THE FRONT
G1
(
Front
)
3
3
G2
F
E
M6x38