ASSEMBLY INSTRUCTIONS Thank you for purchasing our product.
• Please read carefully the assembly instructions before the installation. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • Might require two people.
MAIN PARTS LIST Back tabletop 1 2 x1 Front tabletop 3 x1 Back structure 4 5 x1 x2 Front structure 6 x1 Back lift structure 7 8 x2 x2 Metal leg Front lift structure Central structure x1 9 Headphone hanger 10 Cup holder x1 x1 LIST OF HARDWARE, SCREWS AND FITTINGS PART QTY ITEM A 12 M6x38 PART QTY ITEM G1 4 Plastic cover B 4 M6x32 C 2 M6x25 D 6 M4x12 G2 4 Screw knob 2 Nonlocking caster H 1 Allen wrench 1 Cone wrench (Spanner) E F 2 Locking caster
BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. ❶ Do a quick inventory to make sure the package contains all the parts and hardware listed in the assembly instructions. ❼ To avoid misalignments, always leave the screws loose and tighten them until all pieces are positioned correctly. ❷ Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual.
carefully pierce the laminate to reveal the hole’s actual size. ❻ Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used. ASSEMBLY STEPS First install the non-locking casters E at the back of the legs 3, and the locking casters F at the front using the cone wrench (spanner) as shown.
3 3 (Front)
STEP 3 Assemble the back structure 4 to the back lift structures 7 using screws A as shown. Hardware: A M6x38 4 Pcs H 4 7 (Front) 7 STEP 4 Assemble the front structure 5 to the front lift structures 8 using screws A, making sure the holes on 5 face UP as shown.
STEP 5 First make sure the screw knobs G2 are loose, then with the help of another person, insert the front lift structures 8 thru the covers G1 and into the legs 3. DO NOT TIGHTEN the screw knobs yet. 8 8 G 3 3 (Front) STEP 6 Hardware: C M6x25 D M4x12 2 Pcs Assemble the front tabletop 2 to the frame using: • Screws C to secure it to the structure 5 from underneath, • Screws D to secure it to the lift structures 8 from underneath.
First make sure the screw knobs G2 are loose, then with the help of another person, insert the back lift structures 7 thru the covers G1 and into the legs 3. DO NOT TIGHTEN the screw knobs yet. STEP 7 UNIT IS SHOWN FROM BEHIND WITH ITS FRONT FACING TO THE RIGHT.
STEP 9 Hardware: D M4x12 4 Pcs Assemble the headphone hanger 9 and the cup holder 10 to the front tabletop 2 on the sides of your preference using screws D from underneath as shown. Proceed to set the heights of the tabletops according to your preference, and tighten the screw knobs.
ALL DONE! Give yourself a nice pat on the back.
AFTER THE ASSEMBLY IS DONE, PLEASE READ CAREFULLY THE FOLLOWING CARE AND MAINTENANCE WARNINGS: WEIGHT LIMITS 11 Lbs. 2.2 Lbs. (5 Kg) (1 Kg) 44 Lbs. (20 Kg) 2.2 Lbs.
• Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions. • Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel. • Do not use solvents or abrasive materials to clean the unit. • If you decide to use a cleaning agent, test first on an area hidden from view such as underneath the tabletop. • Do not sit on the unit or lean against it.
This product has been designed for and is intended for office and home-office use only.
