Height Adjustable Standing Desk
ProductTechnical Data Item Data Input 220-240VAC I 100-130VAC Output 29VDC Max Loading 176 lbs/ 80 kg Height Range(Without Desktop) 27 .6"-47 .
INSTALLATION INSTRUCTION • Set the right tube and left tube flat. STEP 1 • Insert the extension tube to the right tube and left tube as is shown in the picture, pre-tightening the bolts. (I) ExtensionTube RightTube _ (i) STEP 2 Pre-installed it for you. For re-installation or size adjustment, please refer to this instruction.
INSTALLATION INSTRUCTION STEPS · Line up the screw holes on the feet and columns. · Fasten the bolts. M6"16 Bolts (i) Avoid excessive tightening bolts · Check both side of desktop before placing the base on the bottom side of the desktop. Adjust the suitable width. It is suggested that the two sides of the frame side brackets are 2-4inch STEP 6 /5cm-10cm from the edge of the desktop and fasten screws. • As shown below, connect related parts, including control box.extension cable and power cord.
