Owner Manual

Align the Mechanism (4) over

the pre-drilled holes underneath

the Seat Cushion (2), make sure

the front of the mechanism is

facing the front of the Seat.

Attach the Mechanism to the Seat

Cushion using Four Bolts (11),

tighten all the bolts with the

Wrench (13), being careful not to

miss-thread the bolts or damaged

the seat.

Turn the Seat Cushion (2) upright

and align the center hole of the

Seat Plate over the lift, then push

the Seat Cushion down onto the

lift firmly until the connection is

secure.

Attach the Armrest (3) to the Seat

Cushion (2) with Two Bolts (12),

using the Wrench (13).

The installation of the other side

Armrest is the same.

Note 1: The "Front" mark on the Armrests and the "Front" mark on the

Seat Cushion should be in the same direction.

Note 2: Armrests are labeled with an "L" (left) or "R" (right) to show which

side they should be placed on.

Step 4:

Step 3:

(11)×4

(4)

(2)

50%

(12)

(3)

(2)