Installation & Assembly

Step 2: Turn the star base upright and insert the lift into the center
hole of the star base. The lift cover should be placed over
the lift.Pay attention to the placing order of the three cups,
and place them correctly as shown in the figure
Step 3: Align the seat plate over the pre-drilled holes underneath
the seat cushion. Make sure that the front of the seat plate
is facing the front of the seat cushion. Attach the seat plate
to the seat cushion using four M6x20mm bolts. Tighten all
the bolts with the wrench, being careful not to miss-thread
the bolts or damage the seat.