Owner Manual

USER OPERATION INSTRUCTION
Read this instructions before operation
Digital Handset Operation
1. Picture
2. Initialization procedure
Step Operation Motion
1 Press and hold Ʒ&simultaneously
more than 6 seconds
Legs begin to move down at a half speed of normal operation
2 Keep pressing Ʒ& Legs move down to the lowest position and rebound 2-5 mm, then stop
3 Release Ʒ& together Initialization is completed
The in
itialization procedure must be completed before the first running after table is installed or parts replaced
3. Move up and down
Step Operation Motion
1 Press and hold Ʒ Legs move up
2 Release Ʒ Legs stop
3 Press and hold  Legs move down
4 Release  Legs stop
4.Set memory positions
Step Operation Motion
1 Press and hold Ʒ or ˈthen release Run the legs to the position you want the table surface to be
2 Click button S, then click button 1 or 2 or 3
within next 6 seconds
Position 1 or 2 or 3 is saved
5. Move to the memorized positions
Step Operation Motion
1 Press and hold the button 1 or 2 or 3 Legs return to the corresponding position saved

8