Installation & Assembly

FUNCTION
ASSEMBLY STEPS
8.Attach the plastic cover(B5)
Over the right side bracket.
11.Use the Allen key to make
the screws align in the holes
correctly and screw them in
tightly.
13.Attach Plastic cover
(J)to the Right side
bracket.
12.Attach the plastic
cover(K) to the left
side bracket.
9.Attach plastic cover(b4)
over the left side bracket.
10.Attach the backrest to
the bottom seat brackets.
1
1
2
2
First attach the bottom screws loosely.
Then move the chair back to align the screw
holes and get the upper part loosely screwed.
When one side is done,repeat the same steps
to screw the other side.
3
3
1.Loading capacity
limited to 330lbs.
Lock
Free
Please sit in the center of
the chair when adjusting
the height.
2.Seat Height adjustment
(Adjusting knob on the right)
3.Rocking:Pull out the handle to
start rocking. Insert to stop rocking.
4.360 degree swivel
360°
Up&Down
H
B5
B1
B3
B4
G
J
H
H
K
X4
X3
H
A
X1