Installation & Assembly (Chair)

Assembly Instructions

M6*25mm

M6*20mm

M6*30mm

1 2 3

Press the casters into the holes at the

end of each base leg.

Insert the lift with cover into the center hole

of the star base.

A A

Attach the arms to the back cushion using

two (A) screws,using the wrench (F).

Check all the components & screws before assembly. Do not install in case part is

missing, contact us to get.

PAGE 1
Assembly Instructions A M6*25mm 2 B M6*20mm 4 C M6*30mm 8 D 8 F 1 Check all the components & screws before assembly. Do not install in case part is missing, contact us to get. 1 Press the casters into the holes at the end of each base leg. 2 Insert the lift with cover into the center hole of the star base. 3 Attach the arms to the back cushion using two (A) screws,using the wrench (F).
PAGE 2
4 Attach the back cushion to the seat cushion using eight (C) screws and four (D) washers using the wrench (F). 5 Attach the seat plate to the seat cushion using four (B) screws with the wrench (F) C D 6 Align the center hole of the seat plate over the lift,then push the seat cushion down onto the lift firmly B B C D 7 For your safety, before using your chair, make sure that all of the screws are fully tightened.