Owner Manual

5
6
Place Plastic Sealing (19) on the bottom of Main Angle Adjuster (12). Align
Plastic Sealing (19) and Main Angle Adjuster (12) over the pre-drilled holes
on the side of Seat Cushion (2), attach these 2 parts with two Bolts (9), using
the Wrench (21).
Step 5:
Place Plastic Sealing (19) on the bottom of Secondary Angle Adjuster (13).
Align Plastic Sealing (19) and Secondary Angle Adjuster (13) over the
pre-drilled holes on the side of Seat Cushion (2), attach these 2 parts with two
Bolts (9), using the Wrench (21).
(12)
(9)
(9)
(13)
(19) (19)