Owner Manual

Assembly Instruction

Step 1:

Turn the Base(6) upside down,

press the Casters (7) into the

holes at the end of each Leg.

Insert the Gas Lift (5) into the

center hole of the Base, the

Telescope Cover (20) should

be placed over the Gas Lift.

Turn the Seat Cushion (2) upside down, push the Foot Rest out, align

the hole position of the Armrest (3) with the pre-drilled hole position

under the Seat Cushion.Attach the Armrest (3) to the Seat Cushion (2)

with Three Bolts (10), using the Wrench (21). The installation of the

other side Armrest (3) is the same.

Step 2:

Note 1: There is "Front" mark

on the Seat Cushion.

Note 2: Armrests are labeled

with an "L" (left) or "R" (right)

to show which side they should

be placed on.

(20)

(5)

(6)

(7)

(10)

(2)

(3)