Owner Manual

Assembly Instruction
Step 1:
Press the Casters (5) into the
holes at the end of each Leg
of base (4).
And then insert the Gas Lift
(3) into the ce nter hole of
the Base.
Connect the seat (1) and back
(2) with the bolts (6), tight
the bolts with Wrench (7).
Step 2:
1
2
4
(3)
(4)
(5)
Tips:
Don’t making the caster go
vertical to the hole, it will
be easily for installation if
make it has a little angle.
(1)
(6)×2
(2)