Installation & Assembly

PAGE 2 OF 5
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
20 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1 GLUE 15g
1 PC
2
CAM BOLT
Ø 7x35.5mm SR
4 PCS
3
CAM LOCK
Ø 15x12mm SR
4 PCS
4
ADJUSTMENT FEET
Ø 35x17.2mm
4 PCS
5 COUPLER 5 PCS
6
BOLT
Ø 4.5x12mm SR
5 PCS
NO DESCRIPTION FIGURE Q’TY
7
BOLT
Ø 6.2x45mm SR
4 PCS
8
BOLT
Ø 6.2x18mm SR
1 PC
9
SCREW
Ø 4.2x25.4mm RBW
10 PCS
10
WOODEN DOWEL
Ø 8x30mm
4 PCS
11
STICKER
Ø 20mm
1 PC
Z4,Z5 not included in blister packaging.
A TOP PANEL 1 PC
B
LEFT SIDE
PANEL
1 PC
C
RIGHT SIDE
PANEL
1 PC
D BACK PANEL
1 PC