USER MANUAL I N A LTO.
Welcome! Residentia Group Pty Ltd — Head Office 165 Barkly Avenue, Burnley Victoria Australia 3066 — Postage PO Box 5177, Burnley Victoria Australia 3121 — ACN. 600 546 656 — Online residentia.group Congratulations on purchasing your new appliance. The InAlto brand is proudly distributed within Australia by Residentia Group Pty Ltd. Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit us online at www.residentia.
Contents General Safety Instructions 4 Product Overview 6 Getting Started 8 Installation 9 Specifications 11 Instructions 12 FAQs & Troubleshooting 14 Other Useful Information 15 Warranty Information 18 Customer Care InAlto recommends the use of original spare parts. When contacting our customer service team, please ensure that you have the following information at hand (which can be found on your appliances’ rating plate). — Model Number — Serial Number T . 1300 11 4357 | E.
USER MANUAL PAGE 4 General Safety Instructions IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. Keep the manual in a safe place for future reference, along with the completed warranty card and purchase receipt.
PAGE 5 INALTO.HOUSE • WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • Usage restriction: This Beverage Centre is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
USER MANUAL PAGE 6 Product Overview 190L Outdoor Beverage Centre A G B H C D E F Key: A. Stainless steel door frame B. Handle C. Shelves (×4) D. Door lock (×2) (front of door) E. Base with ventilation F. Levelling Legs (×4) Also included: Note: Not pictured – Shelf supports (×8 + 1 spare), see page 10 for more details – Keys for door lock (×2), see page 16 for more details G. Light switch H.
PAGE 7 INALTO.HOUSE Control Panel Layout Key: 1 Temperature Control: Up Button 2 Temperature Control: Down Button Press the Up or Down buttons to increase or decrease the temperature inside the Beverage Centre cabinet in 1° intervals.
USER MANUAL PAGE 8 Getting Started Unpacking • Packaging materials: This Beverage Centre has been packaged to protect it against transportation damage. Remove all packaging materials from around and inside the Beverage Centre and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the Beverage Centre when it is not in use.
PAGE 9 INALTO.HOUSE Installation • T wo person installation: Use two or more ablebodied people to move and install the Beverage Centre. Failure to do so can result in back or other injury. • Floor surface: This Beverage Centre must be properly positioned on a dry, sturdy, level surface that is strong enough to support it when it is fully loaded. • Location: We recommend that this Beverage Centre is installed in a sheltered location with the required power safely accessible.
USER MANUAL PAGE 10 Built-In or Freestanding Installation: Your Beverage Centre can be used as a freestanding or a built in unit. The clearances shown in the drawing below (Fig. 1) should be followed for both types of installation. Positioning the Shelves Position the shelf supports inside the racks on the sides (as illustrated in Fig. 2) at your required level. You can then place the shelves firmly on the supports and begin to load your contents. • I n particular, the depth dimension must be observed.
PAGE 1 1 INALTO.HOUSE Specifications Note: Your InAlto Outdoor Beverage Centre is designed to eliminate any condensation from accumulating on the glass doors. This is achieved by heating the outer glass surface of the doors slightly. As such, it is normal for the doors to feel slightly warm when touched. Product Dimensions (H, W, D): 850mm, 870mm, 500mm (+ 41mm handle) Weight (Net / Gross): 51.
USER MANUAL PAGE 12 Instructions • F irst use: After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gases that may have been disturbed during the transportation process to settle. • First cooling down: When you first switch on the Beverage Centre, the compressor will run continuously until the Beverage Centre reaches the set temperature.
PAGE 13 INALTO.HOUSE Manually Changing Back to Normal Operating Mode from the ‘Defrost’ Mode • Press the ‘Defrost’ ( ) and a ‘beep’ will sound. • Hold the button down for 6 seconds, until a second ‘beep’ is heard. • Both indicator lights under the symbol and under the symbol will now flash while the Beverage Centre is gearing up to switch back to normal operation.
USER MANUAL PAGE 14 FAQs & Troubleshooting Problem Possible Cause Possible Solution The Beverage Centre does not operate • The appliance is not plugged in. • The appliance is turned off. • The circuit breaker tripped or a blown fuse. • Plug in appliance. • Turn on power point. • Reset circuit breaker/replace fuse. The Beverage Centre is not cold enough • Check the temperature control setting. • The door is opened too often, or is kept open for too long.
PAGE 15 INALTO.HOUSE Other Useful Information Cleaning and Maintenance WARNING Before cleaning the appliance, make sure it is switched off and disconnected from the power supply. Failure to do so can result in electric shock or injury. • Before cleaning: take out any drinks as well as the shelves. • Wash the inside surfaces with a solution of lukewarm water (1L) and baking soda (2 tbsp). Use a soft, clean cloth to wipe down the surfaces, then rinse with clean water and dry with a dry cloth.
USER MANUAL Power Failure Most power failures are corrected within a few hours and should not affect the temperature of your Beverage Centre if you minimise the number of times the door is opened. If the power is going to be off for a longer period of time, take proper steps to protect the contents. Service and Repair Do not attempt to alter or modify this Beverage Centre in any way. Do not attempt to repair or replace any part of the Beverage Centre unless it is specifically recommended in this manual.
PAGE 17 INALTO.HOUSE Specification and Technical Parameters This product complies with AS/NZS 60335.1 and AS/NZS 60335.2.24 electrical safety, and with EN 55014-1:2006+A1:2009 A2:2011 for electromagnetic compatibility. Responsible Disposal • At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately.
USER MANUAL PAGE 18 Warranty Information WARRANTY TERMS & CONDITIONS REFRIGERATION This document sets out the terms and conditions of the product warranties for Residentia Group Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
PAGE 19 INALTO.HOUSE 7. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
A HIGHER LEVEL O F R E F R I G E R AT I O N — W W W. I N A LT O.
