User Manual

INALTO.HOUSEPAGE 09
SIDE VIEW: IBBQBI4B / IBBQBI6B
BUILT IN INSTALLATION
WARNING
THE CONSTRUCTION OF THE ENCLOSURE AND INSTALLATION OF THE BBQ SHOULD BE CARRIED OUT ONLY BY
AUTHORISED PERSONS.
THE BARBECUE MUST ALSO BE SECURED TO THE ENCLOSURE TO PREVENT IT BEING PULLED OUT AND STRAINING
THE GAS CONNECTIONS.
► Please follow these instructions for installation. Any other requirements of AS/NZS 5601.1, local authority, or relevant statutory
regulations, and ensure adequate ventilation.
► e minimum clearance at the sides of the BBQ to combustible materials is 50mm. Where a non-combustible material is used, this
clearance is not required.
► DO NOT block any ventilation slots of the BBQ below or behind.
► e enclosure material for the cutout must not be combustible.
► DO NOT place gas cylinder underneath the barbeque, keep required clearance and ensure there is 'permanent separation', i.e.
no line of sight between the gas cylinder and combustion area. If the gas cylinder is enclosed, ensure adequate high and low
ventilation (200 square cm each) as required by AS/NZS 5601.1.
► Ensure 150mm clearance to combustibles underneath barbecue fat tray.