User Manual

9
INSTALLATION INSTRUCTIONS
CONTINUED
Chimney installation
–
We
need the secure screws to make sure the hood is stable on the wall.
After hanging the cooker hood on the bracket ,remove the filters , mark
and drill 2 holes and fasten the hood on the wall with 2 wall plugs and 2 2
× ST4 × 30mm screws.
–
Fix the one-way-valve to the air outlet of the cooker hood. Then, attach
two exhaust pipes onto the one-way-valve as shown below.
–
Put the upper chimney into lower chimney .
Mark and drill 4 holes depend on the plate I. Fasten the lower chimney on
the wall with 4 wall plugs and 4×ST4×30mm screws.
Screw plug
Screw
(4mm x 30mm)
Plate I