Operation Manual

05
USER MANUAL
PREMIUM PHONO AMPLIFIER
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions
carefully before connecting, operating or adjusting this product. Please keep this manual for future
reference.
INTRODUCTION
This item converts analogue music on phonographic disk into digital format.
WHAT IS INCLUDED IN THIS BOX
• Pre-Amp Main Unit
• USB A -> Mini 5 Cable
• 3.5mm -> 3.5mm audio cable
• RL audio cable
• Power Supply
FEATURES
• RIAA pre-amplifier circuit for PHONO IN
• Line in / Pre-Amp out switch
• MM/MC selection for different phonograph cartridge
• Compitable with WinOS™ or MacOS™ default drivers
• USB powering
• Audio sampling up to 48KHz
• Supports Win2000™/ WinXP™/Vista™ and Mac OSX™ without additional driver
2.0 DIGITALIZE RECORDS
Follow the following description to grab music on phonograph disk.
A. Connect audio cable R,L -> R,L (optional) with phonograph turntable player & USB preamplifier.
B. To prevent hum and noise recommended the drive of the turntable is to be joined by his ground
wire to the ground screw of the phono preamplifier.
C. Connect the USB cable with PC (or notebook) and the USB Pre-Amp as the illustration below.
D. When the USB connection is ok, the PC will auto-detect this unit as “USB PREAMP”.