User's Manual

IVT BlueSoleil™ User Manual

All specifications are preliminary and subject to change without notice.

Figure 3.15: Set the IP address

Note: When Computer A connects to Ethernet PAN Bridge B it accesses the LAN as if it is

attached to the LAN directly. The network properties of Computer A must be the same as the

computers in the LAN, that is, Computer A and the computers in the LAN must be in the

same subnet and have the same subnet mask. For example, if the computers in the LAN use

DHCP for IP addressing, then Computer A needs to be configured to use DHCP. If the IP

address is configured manually on the computers in the LAN, then Computer A also needs to

be configured manually.

3.4 Computer with PAN acting as a TCP/IP Gateway

The following sections outline how to enable Computer B to access the Internet

through Computer A.

Computer A: Computer B:

Notebook/ Laptop, PIII, 800MHz, 128M Desktop, PIII, 600MHz, 128M

A Bluetooth USB dongle A Bluetooth USB dongle

Windows 2000 Windows 2000

IVT BlueSoleil™ IVT BlueSoleil™

Network Adapter connecting to the

Internet

Step 1: Enable Internet access sharing on Computer A.

i See “Section 3.2: Connect Two Computers”, and complete Steps

1 to 7.

i Refer to steps outlined in “Section 3.4.1 Connect to the Internet

using ICS”, to set up Internet sharing.

Step 2: Computer B can now access the Internet.

Advanced Usage: