User's Manual

IVT BlueSoleil™ User Manual
All specifications are preliminary and subject to change without notice.
17
device Ethernet PAN Bridge B.
i Find the PAN service on Ethernet PAN Bridge B by double
clicking the Ethernet PAN Bridge B device icon. Enter the
Bluetooth passkey (if security is set to High on either side) to
start authentication. The Enter Bluetooth Passkey window
pops up on Computer A. Input the same passkey as the one on
the Ethernet PAN Bridge B. (Figure 3.3)
i Right-click the PAN service icon, and then choose Connect.
(Figure 3.10)
Note: The passkey is provided by the PAN bridge provider and the default value is usually
"root". It can be modified by the software associated with the PAN bridge. For more details
please refer to the user documentation provided by the PAN bridge provider.
Figure 3.10: Choose Connect
i The connection is established successfully (Figure 3.11). Wait
until the valid IP address appears in the bottom right status bar
on Computer A.