User Manual

8
11
14
15
16
12
10 13
9
Ending calls
During conversation, touch “MFB” button will end the call.
Transfer call (Voice Transfer)
To transfer a call from the unit to mobile phone, please follow the operation instructions
of your phone.
To transfer a call from mobile phone to unit, touch the “MFB” button shortly during
conversation.
Adjust volume
The sound signal transmitted from Bluetooth FM Handsfree Kit is at fixed level, you can
adjust the volume at your FM receiver.
Last number redial
To redial the last number, long press the “forward” (“ > “) button for about 2 seconds.
When you are making an outgoing call, LCD will display
After the outgoing call is accepted, LCD will display
6-3.
6-4.
6-5.
6-6.
Voice dial
Make sure voice dial function is set up in mobile. Press and hold the “Backward” (“ < “)
button for about 2seconds to activate the voice dialing.
Microphone mute
During conversation, press the mute key will mute the microphone. Press the mute
key again will resume microphone function.
When the microphone is muted, the icon will be shown on the LCD.
Call waiting
When the unit is in phone conversation and there is another call coming, pressing “>” for
2 seconds will activate mobile phone to switch between these two phone calls.
Play and pause the music
Make sure your phone supports A2DP and AVRCP profile. On your phone, choose your
song and play. When the music is playing, LCD on the Bluetooth FM Handsfree Kit will
display “ ” icon. You can touch “MFB” button on the Bluetooth FM Handsfree Kit to
pause or play the music.
Remark:
If you find the music only play on your phone and cannot transfer to your Bluetooth FM
Handsfree Kit, please check below.
a. Check whether your phone have A2DP and AVRCP profile and connect with Bluetooth
FM Handsfree Kit.
b. Choose the suitable music player for playing through Bluetooth. (Detail please refer
to your phone manual)
c. Some phones have the sound output setting allow you to set the sound output only at
mobile phone, please disable it. (Detail please refer to your phone manual)
6-7.
6-8.
7.
Play next song
When the music is playing, press and release “forward” (“ > “) button will play next song.
Play previous song
When the music is playing, single press and release the “backward” (“<”) button will
replay song from the beginning. Double press the “backward” (“<”) button will play
previous song.
Not every mobile phone will replay current song from the beginning by single press of
“Backward” button. Some mobile phones or Bluetooth devices, single press will go to
previous song.
8.
9.
No network signal alert
If the mobile phone cannot locate the network signal (e.g. out of the reach), alert tones
will be heard every 5 seconds from the Bluetooth FM Handsfree Kit. LCD will display
“No Network Signal” icon.
10.
FM frequency memory programming
13-1. Long press “M” button will activate FM memory programming mode.
The current frequency and the icon “MEM” will be displayed and flashing.
13-2. Press “<” / ”>” button to increase/decrease frequency
13-3. Press “M” button, “Pn” location will display and flash.
13.
FM frequency auto scan
Press the “Auto scan” button, Bluetooth FM Handsfree Kit will automatically locate a free
FM channel for you. Please tune your car radio to this channel manually or by auto
search function in your car radio.
FM main power auto off
Please note that in order to comply with some countries' radio regulations, the FM
transmission may be turned off automatically if there is no audio signal for about 30
seconds.
Preset channel recalling
Press "M" button will show the current frequency used. Subsequent press of "M" button
will recall the next memory in order.
15.
14.
16.
Connection between Bluetooth FM Handsfree Kit with music players
When Bluetooth FM Handsfree Kit is not connected with your mobile phone, you can
broadcast your music from other music players through it.
Plug the iPod / MP3 / MP4 to audio input jacket of Bluetooth FM Handsfree Kit.
Turn on the music player such as iPod / MP3 / MP4 .
17.
18.
Accessories
Not every mobile phone supports no network signal alert feature.
Transfer signal from Bluetooth FM Handsfree Kit to car radio system
“Please set the Hands-free Kit to a desired free FM frequency channel and tune your
car radio to this frequency manually or using the auto search function in your car radio.”
11.
12-2. Press the “>” / “<” button to increase or decrease the frequency.
12-3. To exit direct tuning mode, press “Auto scan” key or wait for timeout without further
frequency increment / decrement.
FM frequency direct tuning
12-1. When Bluetooth FM Handsfree Kit is turned on, press “M” button once will activate
direct tuning mode. Frequency value on LCD will flash with “MEM” icon solid on.
12.
13-4. Press “M” button to switch between memory locations.
13-5. Long press “M” button to store the target frequency to select memory location.
6-9.
Accessories
Status
1 x Car charger
Provided
Provided
Provided
Provided
Provided
3 x AAA
Rechargeable battery
1 x Mounting bracket
1 x Mounting stand
1 x Audio wire
FCC User manual:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontr-
olled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. To maintain compliance with FCC RF exposure
compliance requirements, please follow operation instruction as documented in this
manual.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.